THIS ITEM SHIPS SEPARATELY FROM OTHER MOUNTAIN CLEATS INC. PRODUCTS (VIA @SPLITBOARDUPGRADES). IF ORDERING ADDITIONAL ITEMS, PLEASE PLACE A SEPARATE ORDER FOR THE SKEATS™ GLIDE FIN 2.0 ADAPTERS. EXTRA STRAPS CAN BE ADDED TO YOUR SKEATS™ GLIDE FIN 2.0 ADAPTERS OR CLAWS ORDER.

limited spring 2026 usa and japan release! PRE-ORDERS NOW ACCEPTED for early april 2026 delivery.

Pair Includes:

• (2x) Stainless Steel Skeats™ Glide Fin 2.0 Adapters (85mm: 2x83g=166g/5.8oz, 105mm: 2x89g=178g/6.3oz) Made in Vietnam

Product Description:

Skeats™ Glide Fin 2.0 Adapters are for those looking to add lower drag minimalist ski crampon to their Skeats™ Glide Fins . The longer side points add side hilling grip to aid skiers and splitboarders in navigating steep switchbacks and traversing variable snow and ice. 

Skeats™ Glide Fin 2.0 Adapters will benefit any skill level. For the beginner, steeper slopes and kick turns are easy to master. For the expert, extra grip insurance on critical sections gives peace of mind. 

Skeats™ Glide Fin 2.0 Adapters help overcome ski and splitboard limitations. If your ski/splitboard has a short-radius sidecut or rocker you lose edge and skin traction. Skeats™ Glide Fin 2.0 Adapters get you that traction back and more. 

If splitboarding, the use of conventional “soft” snowboard boots limit your ability to apply edge pressure. Use the Skeats™ Glide Fin 2.0 Adapters with the Skeats™ Glide Fins to gain back edge grip when sidehilling. The Skeats™ Glide Fin 2.0 Adapters give splitboarders the ability to traverse like skiers. Keep the group together! 

Skeats™ Glide Fin 2.0 Adapters are small and packable and can just live in your backpack. You can pack them in an old sunglasses case or simply stow in a hip pouch.

Skeats™ are also the perfect option for people who use more than one width of ski, more than one type of binding, more than one splitboard, or who both ski tour and splitboard. 

Sizing:

The mounting position should be just behind the tour mode toe piece; please measure the width of your skis/splitboard halves at the recommended mounting location to determine the best size that will work for you. For skis this is near your waist width, for splitboards this is near half the waist width.

The Skeats™ Glide Fin 2.0 Adapters 85mm are compatible with the 85mm Glide Fins. They are for mounting position widths from 85mm to 115mm. So use these with skis with a mid waist from 85mm to 115mm.

The Skeats™ Glide Fin 2.0 Adapters 105mm are compatible with the 105mm Glide Fins. They are for mounting position widths from 110mm to 135mm. So use these with skis with a mid waist from 105mm to 110mm.